A new home greets us with a lot of problems, plumbing installation being one of them. You should consider many factors before initiating plumbing work at a new house.
If proper measures are not taken during plumbing installation, it can cause numerous problems in the future. Hence, this article focuses on important measures that you should take while doing plumbing work in the new house.
Things To Take Care
To flow water through your home, new construction plumbing relies on natural laws such as gravity and pressure. The plumbing system in your home will be divided into two subsystems: one for freshwater and the other for wastewater.
While freshwater enters your home, wastewater is discharged into a septic tank or the public sewer system.
Before initiating the installation work, you must know about installing the following equipment of plumbing:
1. Shut-Off Valves
Motorized ball valve suppliers manufacture shut-off valves that should be installed under sinks, toilets, and other plumbing equipment, with the main water shut-off valve located near the water meter.
If the toilet leaks, you won’t have to turn off the water supply to the entire house. Instead, you can use the individual stop valve on the toilet to turn it off.
2. Water Meter
Water must first pass through a water meter before entering your property. The meter records how much water you use so the water company can calculate how much you should be charged.
5 Tips For Plumbing Installation
Before beginning the construction process on a new home, careful planning and deliberation are required. If you’re building a new home, you’ll need to think about not only the furnishings, but also the plumbing, HVAC, and construction materials.
If a home is built without making the necessary preparations, it can be unpleasant and troublesome. A faulty plumbing system, for example, might lead to further leaks and significant water damage.
To avoid difficulties, one should make sure that plumbing systems are fitted correctly. Here are some tips to carry out plumbing installation properly and avoid problems:
1. Cut Down Costs by Sharing Wet Walls
To house the pipes, most houses have separate wet walls for each room, such as the bathroom and kitchen, but you can save money by sharing a wet wall instead. You can design a plan where the kitchen and laundry room share a wet wall or where the bathrooms share a wall.
A shared wet wall can save you money because it will lower the amount of labor and materials required to install it. It will also be simpler to maintain and repair your plumbing if all of the pipes are in one location.
2. Install Shut-Off Valves at Accessible Locations
Plumbing issues, such as water leaks, can arise over time. You’ll want to ensure each connection has its own shut-off valve to make future plumbing problems easier to fix.
Shut-off valves allow you to turn off the water to the affected area of the system without shutting down the entire system. For example, you’ll turn off the hot and cold water pipes at the valves under each sink. Bathtubs, showers, and toilets should all have shut-off valves in an easily accessible location.
Also, when the water company or your plumbing services provider connects to the water main, ensure the water main shut-off valve is installed in an easily accessible area. For example, the water main shut-off should be located inside your garage rather than in the crawl area, where it may be difficult to reach in the event of a plumbing emergency.
3. Be Aware of the Plumbing Needs
When building a plumbing system, it’s best to think about your current and future plumbing needs. To ensure functionality, you must decide where your drain lines, plumbing, and sewer will be built.
Include all current and future water needs in your plumbing system while you still have easy access to it, and you’ll save money on future repairs.
You should also think about your outdoor plumbing requirements to make sure you have enough outdoor plumbing faucet connections to use around your home.
Considering the seasons is important as well，because you need to ensure that your pipes are durable and will last even in the harshest temperatures, especially during the winter.
4. Install Water Softeners
Water softeners are ideal for homes with a lot of hard water problems. Even if you don’t require a water softener, it is recommended to install the necessary piping. When installing plumbing in new homes, keep in mind that your plumbing requirements may change after some years.
5. Consider Rooms That Need Water Access
In a house, typically, the following 3 rooms need water access:
You should think about the appliances you’ll have in the kitchen when planning it. Water lines for your refrigerator, dishwasher, and sink are required.
You should also think about future improvements, such as adding a kitchen island that will require a plumbing line if you wish to add a sink later.
When planning a home, think about how many bathrooms you’ll need, and examine each one separately. Is there going to be a guest bathroom? Is that a bathtub? Is there a Jacuzzi? Is it time for a shower? It’s advisable to make a list of the extras that your bathroom will include, as well as the necessary toilets and sinks.
3. Laundry Area
Laundry rooms are just as crucial as bathrooms and kitchens. The washer connections must be placed correctly in order to be easy to install and use. To avoid water buildup on the floor while washing clothes, you also need to have a proper drainage line in the laundry area.
Plumbing installation is a very important task. It requires a lot of planning and care. In order to save money and prevent plumbing-related problems in the future, it is necessary to address all possible problems while plumbing installation in the new house.