Any home improvement project can be significant, considering the amount of impact you intend to create through it. For example, you can choose your bathroom. It can feel tiring to walk into a dreary-looking bathroom first thing in the morning or last thing in the night. You may hate a few aspects of it, such as chipped paint, cracks in the sink, loose caulking, underperforming faucets, etc. But if something bothers you so much, you must change it at least for your mental peace and inner satisfaction. Well, do you worry about the cost? It is essential to understand that changing these elements are more about upgrading the style. These will involve expenses. Still, it doesn’t dent your savings. This article will help you in knowing Removing a Glued Bathroom Mirror Over Your Sink Wall.
Usually, remodeling efforts tend to be expensive as they focus on improving the existing base structure of everything. It consists of changing plumbing locations, pushing the walls, and more. However, simple upgrades or facelifts don’t threaten you with hefty bills. But you can still enjoy their impact. If you don’t believe it, consider replacing a wall mirror just. You will understand what it means. Almost every bathroom pays special attention to the sink area for its central position. You can adorn it with an elegant wall mirror, a beautiful sink, an efficient vanity, and much more to create an impression. You can also get a gold water faucet for the restroom for this section. The combination of these elements can spell magic.
Nevertheless, you cannot expect them to have a lasting effect on the overall décor beyond a certain point. These will age or succumb to bad health. Or, you can get bored looking at the same set of things. So, no matter what, a quick facelift will not hurt. You can start it with something as simple as mirror replacement. Remove the old and install a new hanging mirror with exciting highlights. However, before embarking on this, you need to ensure one thing – is your frameless mirror sitting on the wall without nails? More precisely, if you glued your mirror to the wall for a quick fix like many other homeowners, you would want to be careful while dislodging it.
Hanging mirrors usually take time during installation as you have to drill holes for them. But, later on, you can change them hassle-free. On the other side, glued wall mirrors quickly settle down in their place, but you require DIY expertise, knowledge, and proper tools to get rid of them. Hence, don’t bother if you feel stuck with your decoration goal. Are you a DIY person? Here are some steps to navigate this process.
How to remove glued mirrors?
Prepare for removing the glued mirror
Most likely, there will be a vanity under it. Clear it off all the things. Your countertop should not have anything. Cover it and the surrounding area with a heavy canvas drop cloth to prevent glass shards from damaging them. You should also wear long sleeves, full-length pants, closed-toed shoes, heavy-duty gloves, protective eyewear throughout this job. Next, you have to get the mirror ready. Cover it with strips of tape all over in a way that the broken pieces don’t fly if the mirror shatters.
If your mirror is 2×2 ft or smaller, you can heat the glue from the corners and edges with a blow dryer or heat gun. From there, you can slowly move to the middle part of it. However, be sure the distance between your heating tool and the mirror is about 6 to 12 inches.
Work through the loose end
Adhesive can start melting after some time. At that point, your putty knife should be handy. Slip it between the drywall and the mirror from the bottom edge. Your one hand should rest under the mirror. When the tool gets its position, you can try to draw the handle toward you to force the mirror away from its location slightly. As soon as it leaves its place, it would help if you supported it with your other hand as well.
Since the drywall can get slightly damaged in this process, you must not panic. Keep the mirror aside and examine the wall for the residue of adhesive. If you feel something, you can heat the area to melt that too. Next, use your putty knife to scrape it. Finally, you can fix the drywall with paint and other elements.
Things to consider – safety and precautions
It is critical to remember all the time that this work involves working with a large glass piece. Hence, it would be best if you addressed all types of safety concerns beforehand. Even though it doesn’t include hammering the glass, you need to prepare for such incidents. Hence, wearing proper dressing is crucial. From full sleeve shirt and full pants to shoes, you have to put on all this along with eye protection and hand gloves.
Since the task demands full attention, you can enlist necessary items to keep everything ready. For example, the list would include safety eyeglasses, leather gloves, a putty knife, a heat gun or blow-dryer, and a strong canvas drop cloth. In addition, it will be better if you also arrange for a helping hand.
Once done with this, the wall over the sink area will be available for reuse. You can choose a new mirror design for it. If your previous mirror was rectangular, you could try an oval shape this time. Or, you can buy something with some detailing depending on your personality. Essentially, it should feel like a new addition while blending with the background. As soon as this change happens, you would be able to notice the difference. The entire sink area can come alive with just one minor upgrade.
Many homeowners rely on this décor trick to refresh their bathroom ambiance cost-effectively. In a small bathroom, it can be more remarkable because there will be fewer items. Hence, anyone’s attention can quickly drift towards this. So, it can be worth trying at least once. After this modification, you can focus on other features, such as sink, faucet, vanity, cabinet hardware, countertop storage, etc.